How to Clean Wash Basin Drain Pipe: Easy DIY Steps

Basic Ways to Clean and Wash Any Basin Drain Pipe

There are many ways to clean your wash basin drain pipe. Among many such methods, the basic methods should be effective for many of the clogging and stains. There are 5 main methods to clean your wash basin drain pipe. These five basic methods include:

Using Soap and Boiling Water

This is one of the most basic methods to clean the wash basin drain pipe. To put this method into work, one needs some liquid soap that cuts grease and a pot of boiling water. This apparently is the method that cleans the basin and clears any grease that might be sticking in your drain pipe. The following is the procedure to clean the wash basin drain pipe using soap and boiling water:

• Fill the large pot full of water to a boil, making sure it is full enough in volume to cover the sink.
• Pour half a cup of dish soap- or any liquid soap that can cut grease down the drain.
• Pour the boiling water
• Wait for a few hours
• While doing this, you should note that you may need to repeat this process a few times to clean and unclog the wash basin drain pipe fully.

Using Baking Soda and White Vinegar

As the title suggests, this DIY cleaning method for the wash basin drain pipe includes baking soda and white vinegar. For this, you will need two pots of boiling water, a cup of baking soda, and a cup of white vinegar. With the following materials, you may start the process below:

• Pour a pot of hot water down the drain.
• Place a cup of baking soda in the basin.
• Add 1 cup of white vinegar if that is not enough to take all the baking soda down the drain. White vinegar may be mixed with water
• Put the plug into the drain and let it sit for 10 to 15 minutes.
• Pour down the drain another pot of boiling water.

Using Drain Zip

A drain zip or a drain cleaning zip tool is essentially a thin, flexible, plastic tool that is designed to remove hair and other debris from the drain. It has a small upward-facing hook along its length that grabs onto clogs as it is inserted and pulled out from the wash basin drain pipe. The method of cleaning the drain using this tool is as follows:

• Hold on to an end of the zip and stick it down the drain
• Pull the drain zip back and remove any debris or hairs that are caught on its teeth
• Run the water and flush the drain
• Repeat until you are sure that the drain is cleared.
• You can also use a plunger along with the drain zip if it is not cleared.

Using Plumbing Snake

A plumbing snake, also known as a drain snake, is a commonly used tool for clearing clogs from pipes or drains. This tool consists of a flexible, coiled metal cable with a handle on one end and a spiral tip on the other end. To clear the wash basin drain pipe using this tool, you should follow the process below:

• Prepare the area by placing a bucket or a towel to catch water and debris
• Insert the sink into the drain
• Keep pushing the drain snake until you feel the resistance of the blockages.
• Rotate the handle to break through or snatch the clog
• Push and pull to break up the clog
• Slowly pull the drain snake out
• Clean the drain snake and the drain.

Using Enzyme Based Cleaners

Enzyme-based cleaners are essentially chemicals that break apart the clog and clean your wash basin drain. Therefore, they are highly effective for regular maintenance. To use the enzyme-based cleaner, you can follow the process below:

• Choose the right enzyme-based cleaner, as there are many options that target organic buildups.
• Read the instructions
• Prepare the drain and ensure that it is free from water
• If there is a blockage that causes water to not go down, remove as much water as possible
• Pour the enzyme cleaner into the drain as per the instruction manual
• Let the enzyme sit for the duration mentioned in the manual.
• Flush the drain with warm water.

These are some of the main DIY ways to clean the wash basin drain pipe. Besides the ones we mentioned here, there can be other specific methods based on the specifics of your draining pipe. If you want expert advice on blocked drain tips, do let us know at Everest Drain & Plumbing.

Tips To Keep Your Wash Basin Drain Pipe From Clogging

Now that we have discussed how to clean wash basin drain pipes let’s talk briefly about some tips to keep your wash basin pipe from clogging before we end our discussion. Some of the key tips we have for preventing wash basin drain pipes from clogging include the following:

• Use a drain strainer to keep the food and other small particles out while washing them if you do not have a garbage disposal in your drain
• Don’t pour grease or oil down your drain
• Pour a pot or a kettle of hot water once a week to melt away any form of grease buildup.
• Always run a stream of cold water when using your garbage disposal if you have one.
• Only flush appropriate waste
• Prevent biowastes such as hair from falling down the rain
• Fill the sink with water and release it to flush your piping occasionally
• These are just some of the general tips you can use to keep your wash basin drain pipe from clogging.

Conclusion

Wash basin drain pipes are an integral aspect of a home that we often overlook. However, it severely impacts our daily lives when it gets clogged or dirty. The good news here is that there are good ways to clean wash basin drain pipes. These methods range from simple hot water and soap to enzyme cleaners.

We hope you found this helpful. If you seek further insights into the various aspects of drainage, do check out some of our other blogs. And if you want the best drainage service in Toronto, look no further than Everest Drain & Plumbing. Thank you for reading till the end.

FAQs on Cleaning Wash Basin Drain Pipe

How to clean blocked drainage pipes?

There are many ways to clean blocked drainage pipes. Some of the key methods include:

• Pouring soap and boiling water
• Pouring baking soda and white vinegar
• Using a drain zip to pull out clogs
• Using a plumbing snake to unclog the drain
• Using enzymes to dissolve away the blockages

Does white vinegar clean drain pipes?

Yes, white vinegar will clean drain pipes if used with baking soda and poured down the drain pipe. In such cases, we highly recommend pouring a pot of boiling water before and after the application of white vinegar and baking soda.

How do I clean a kitchen sink drain pipe?

There are various methods applied to cleaning the kitchen sink drain pipe. Some of the major methods include:

• Soap and boiling water being poured down it
• Baking soda and white vinegar poured down it
• Use of zip to pull out the blockage from the drain
• The plumbing snake used to take out blockages in the drain
• Using Enzymes to dissolve away the blockages.

How often should I clean my drain pipe to prevent blockages from building up?

How often you clean away your drain pipe depends on how you use your drain. However, a good idea is to do a weekly cleaning to prevent any clogs from coming upon you.

How to dissolve soap stuck in a pipe?

Begin by pouring boiling water down the drain to melt the soap. It is one of the great ways to dissolve soap in the pipe. You can then follow that up by using a mixture of baking soda and white vinegar to dissolve any remaining soap. If the soap is still present, you can even use various forms of enzymes.

What are the best drain cleaning methods?

The specific methods depend on your circumstances. However, some of the best cleaning methods include:

• Boiling water for grease and light buildups.
• Baking soda and vinegar for natural cleaning and deodorizing.
• Plumbing snake for tougher clogs.
• Enzyme-based cleaners for eco-friendly, regular maintenance.