Roof Drain Cleaning – The Easy Way to Keep Your Home Clean and Fresh

What is Roof Drainage?

The main objective of a roof is to shield a building from the elements. Allowing rain and snow to stand and soak inside a building may cause rot and deteriorate the structure, which can swiftly cause damage.

To prevent the formation from being harmed by moisture, a roof drainage system diverts rainwater to the area around the construction.

Tools that you need to clean your Roof Drain

The appropriate equipment to clean or open the drain depends on the type of drain:

• A broom
• Pipe brush
• Drain snakes
• A hose
• A flashlight

Types of Roof Drain

The upkeep of the roof and the drainage system is crucial for a homeowner. After all, your home is shielded from the elements by the shelter every day. Keeping your roof and roof drains clean regularly will serve your best interests.

But how are your roof drains cleaned? The type of roof drains you have installed truly makes a difference. Not confident Let us help you navigate them:

Conventional Gutters: 

Gravity may often be used for all drainage needs on a regular pitched roof. Water easily slides off a sloping roof and into gutters, where it is directed into a drainage system below the surface.

This roof drain solution is straightforward and affordable, prevents water from flowing everywhere, and offers enough security for doors and windows. Additionally, it aids in preventing water from collecting near the building’s base.

Scuppers:

Scuppers are frequently used for terraces, parapets, and flat enclosed roofs. This style of roof drain consists of tiny holes drilled into the roof’s side that allow water to escape. The area next to the dilemma is typically flashed with metal or rubber to prevent water leakage.

Scuppers frequently link to a downspout after emerging from the hole to send the water toward a drainage system beneath the earth. In other cases, the scuppers stick out from the structure and let the water drain into a designated place, such as a gravel drainage area, down.

Inner Drain:

An inner drain, a common choice for flat roofs, is a drain or drains located in a somewhat lower region of the roof and linked to an inside pipe that goes to a drainage system below ground. Usually, these drains contain filters or other obstacles to prevent waste from entering the tube. The lack of ugly gutters and downspouts visible outside the structure and the low likelihood of pipe freezing are two benefits of these drains.

Siphonic Drain:

Downspouts and underground drainage pipes are less necessary with this advanced drain since it is built to work at maximum capacity. The pipes can handle more since the mechanism effectively draws water from the roof into itself and prevents air from being sucked in. Both flat and sloped roofs can use these systems.

To solve the issue if you think there is a blockage, try the following:

• Clean away any dirt, weeds, and debris near the drain while on the roof. Doing this may clear the drain without worrying about other dirt entering it.
• As directed by the manufacturer, remove the roof drain cap. Examine the clog’s intensity further. To determine whether any material obstructs the vent or piping, you should shine your flashlight down the drain.
• If feasible, use your hand to clear any obstruction from the drain. Avoid sticking your hand in the gutter by diving very far. Put some water down to find out if and how much the drain is still blocked.
• After removing the obstruction, use the pipe brush to clean up any light buildup or debris that may have remained on the drain’s sides. Rerun the hose to clear out any last bits of debris.

Seeking a Professional Plumber?

Whether you have a plumbing issue or a roof drain problem, we advise calling your neighborhood’s reliable plumber if you cannot unclog a roof drain or give Everest Drain And Plumbing a call. When there is an emergency, we are available. You can get rid of your difficulty with the assistance of our certified, licensed plumber.